AR26.60-P-0633RR | Remove/install contact spring for switching module automatic function | 12.4.06 |
Transmission 717.408 in MODEL 452.3 /4
Transmission 717.476 /477 in MODEL 452.3 /4
up to WME4524321L040131
P26.60-2331-01
1 Shift lever knob
2 Automatic function push button
P26.60-2330-06
3 Contact spring
4 Microswitch for automatic function
N15/5 Electronic selector lever module control unit
| Remove/install | ||
1 | Pull shift lever knob (1) towards direction of the arrow | The automatic function push button (2) must not be actuated during the detaching process, as otherwise the contact springs (3) or the microswitch for the automatic function (4) may be damaged. | |
2 | Unhook contact spring (3) on microswitch for automatic function (4) | ||
| Checking | ||
3 | Check contact spring (3) for signs of damage | Replace contact spring (3) if damaged. | |
4 | Check attachment point (arrow) at left and right on the microswitch for the automatic function (4) | See fig. A. | |
If the attachment point (arrow) left or right on the microswitch for the automatic function (4) is damaged, then the electronic selector lever module control unit (N15/5) must be replaced. | |||
Model 452.3 /4 with transmission 717.408 and model 452.3 /4 with transmission 717.476 /477 up to WME4524321L040136, refer to: | |||
Remove/install shift module | |||
5 | Install in the reverse order |