AR26.60-P-0630RR | Remove/install shift module | 9.3.07 |
TRANSMISSION 717.408 in MODEL 452.3 /4
TRANSMISSION 717.476 /477 in MODEL 452.3 /4
up to WME4523371L040131
P26.60-2189-04
1 Screwdriving
2 Electrical connector
3 Electrical connector
N15/5 Electronic selector lever module control unit
Modification notes
28.3.06 | Note on vehicles with Softouch - automatic shift program (FFO), code V11, added | Step 3 | |
28.3.06 | Note on Softouch - automatic shift program (FFO) function, code V11, added | Step 5 | |
28.3.06 | Validity of basic data updated | Transmission 717.476 /477 |
| Remove/install | ||
1 | Remove floor covering | ||
2 | Unscrew bolts (1) on the left and right of the electronic selector lever module control unit (N15/5) | | |
3 | Remove electronic selector lever module control unit (N15/5), disconnect electrical connector (2) and electrical connector (3) | Do not damage locking tabs as otherwise the connector will no longer be locked into place. | |
On vehicles with Softouch - automatic shift program (FFO), code V11, there is an additional connector close to the electrical connector (2) on the circuit board. This additional connector should not be disconnected when the electronic selector lever module control unit (N15/5) is removed. | |||
Installation: Pay attention to latching of electrical connectors. | |||
4 | Install in the reverse order | ||
| Checking | ||
5 | Check electronic selector lever module control unit (N15/5) | Only if the Softouch - automatic shift program (FFO) function, code V11, is available. | |
Check switchover function (automatic/manual) by pressing the switchover button on the selector lever. | |||
The display takes place via the display in the instrument cluster. |
Shift mechanism