ar2640p2470ff

Remove and install front section of transmission housing

Typ ar · temat 26.40 · wersja 0102 · 2016-11-11

Dotyczy: Transmission 717.4 in model 454.0

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 26 Mechaniczna skrzynia biegów › 26.40 Obudowa — Seria 454 (modele 0**)

EinPAS 17 Zespół przeniesienia napędu/ oś › 17.20 Skrzynia biegów › 17.20.30 Obudowa/pokrywa/miska olejowa/zawieszenie — Seria 454 (modele 0**)

Dotyczy też silników/skrzyń biegów: 717 4**

AR26.40-P-2470FF

Remove and install front section of transmission housing

03.11.2016

Transmission

717.4 in model 454.0

Remove and install front section of transmission housing

P26.40-2091-09

Shown on TRANSMISSION 717.470

1	Rear section of transmission housing		3	Screws/bolts		5	Screws/bolts
2	Front section of transmission housing		4	Bracket

Remove and install front section of transmission housing

Shown on TRANSMISSION 717.470

1	Rear section of transmission housing
2	Front section of transmission housing
6	Screws/bolts

P26.40-2097-11

 	Remove/install
1	Drain transmission oil		AR26.00-P-0200FF
2	Remove transmission	Transmission 717.478 in model 454.0	AR26.10-P-0020FB
		Transmission 717.470/471/474 in model 454.03	AR26.10-P-0020FF
		Transmission 717.473/475 in model 454.0	AR26.10-P-0020FG
3	Remove central clutch release bearing		AR25.20-P-0180FF
4	Unscrew screws/bolts (3, 5)	 Bolt, front section of transmission housing to rear section of transmission housing	*BA26.40-P-1005-01D
5	Remove bracket (4)
6	Remove screws/bolts (6)	 Bolt, front section of transmission housing to rear section of transmission housing	*BA26.40-P-1005-01D
7	Undo front section of transmission housing (2) using suitable tool from rear section of transmission housing (1) and carefully remove	 Do not damage the sealing surfaces on the front section of the transmission housing (2) and on the rear section of the transmission housing (1). Otherwise, leaktightness cannot be ensured.
		 Pay attention to guide sleeves in rear section of transmission housing (1).
		 Installation: Clean sealing surfaces and apply sealant to sealing surface on rear section of transmission housing (1).
		Loctite 5971	*BR00.45-Z-1092-01A
8	Install in the reverse order

 Housing

Number	Designation		Transmission 717.470/471/472/473/478 in model 454	Transmission 717.474/475 in model 454
BA26.40-P-1005-01D	Bolt, front section of transmission housing to rear section of transmission housing	Nm	15	15

Repair materials

Number	Designation	Order number
BR00.45-Z-1092-01A	Loctite 5971	Henkel AG & Co. KGaA www.loctite.de

Powiązane dokumenty