Remove/install bushing of transmission mounting

AR26.10-P-0030MCC

11.11.11

TRANSMISSION 717.4 in MODEL 451.3 /4

P26.10-2159-11

1 Mount for transmission mounting

2 Bolt (on engine 132.930, 660.9)

3 Air supply ducting for charge air cooler (on engine 132.930, 660.9)

4 Bolts

5 Screw

6 Frame-type integral support

 	Remove/install
1	Remove air filter housing	Engine 132.910	AR09.10-P-1150MCC
		Engine 132.930	AR09.10-P-1150MCB
		Engine 660.9	AR09.10-P-1150MCD
2	Lower vehicle with vehicle lift	With engine 132.930, 660.9.
3	Support transmission using a hand-operated hydraulic floor jack	 Use a suitable protective underlay in order to avoid damage to the transmission.
		Trolley jack gotis://H_00.12_01.0
4	Unscrew bolt (2) of air supply ducting for charge air cooler (3) from bushing of transmission mounting (1)	With engine 132.930, 660.9.
5	Remove bolts (4) for transmission mounting bearing (1) on transmission		*BA26.00-P-1002-01D
6	Unscrew bolts (5) of bearing of transmission mounting (1) from frame-type integral support (6)		*BA26.00-P-1009-01D
7	Remove bushing of transmission mounting (1) upwards and take out	 On engine 132.930, 660.9 Press air supply ducting for charge air cooler (3) backwards.
8	Install in the reverse order

 Complete manual transmission

Number	Designation		Trans-mission 717.48


BA26.00-P-1002-01D	Bolt, transmission mount to transmission	Nm	80
BA26.00-P-1009-01D	Bolt, transmission mount to frame-type integral support	Nm	56