ar2210s1001ef

Remove/install carrier for engine mount

Typ ar · temat 22.10 · wersja 0100 · 2015-02-25

Dotyczy: MODEL 447 with ENGINE 622

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 22 Zawieszenie zespołu › 22.10 Łożysko zespołu, wspornik zespołu — Seria 447 · Seria 622

EinPAS 15 Silnik › 15.15 Silnik spalinowy kompletny/obudowa silnika/mechanizm korbowy › 15.15.20 Zawieszenie silnika — Seria 447 · Seria 622

AR22.10-S-1001EF

Remove/install carrier for engine mount

5.2.15

MODEL

447 with ENGINE 622

Remove/install carrier for engine mount

1

Carrier

2

Coolant hose

3

Screw/bolt

S22.10-4561-06

Danger !

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Notes on coolant

AH20.00-N-2080-01A

Remove/install

1

Unfasten coolant expansion reservoir and swivel out of the working area

AR20.30-S-4950E

Hoses are not removed.

2

Remove bracket for fuel filter and swivel out of the working area

Replace fuel filter

AP47.20-S-0780EF

Do not disconnect fuel lines.

3

Remove left engine support

AR22.10-S-4350EF

4

Remove coolant hose (2) from carrier (1)

Model 447 with code H12 (Auxiliary water heater) Model 447 with code HH4 (THERMOTRONIC AAC) Model 447 with code HH9 (Semi-automatic regulated A/C, TEMPMATIC)

5

Remove support (1)

To do this, remove screws/bolts (3).

Bolt, carrier to body

*BA22.10-N-1005-01EF

6

Install in the reverse order

Engine mounts, engine supports

Number

Designation

ENGINE 622 in MODEL 447

BA22.10-N-1005-01EF

Bolt, carrier to body

Nm

62

Powiązane dokumenty