Remove/install right engine mount

AR22.10-P-1102MFF

Remove/install right engine mount

22.01.2020

Engine

654 in model 118, 177, 247

Modification notes

28.11.2019

Document completely revised.

1

Engine mount

3

Screw

4

Refrigerant line

5

Screw

6

Screw

8

Bolts

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Warning

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating area of mechanical components when moving components.

AS00.00-Z-0009-01A

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

 

Remove/install

1

Remove engine stabilizer mount at the top.

AR22.10-P-1145MFF

2

Remove screw (3) and place refrigerant line (4) to one side.


Do not subject refrigerant line (4) to tension, and do not crush or kink it.
This will cause damage to the refrigerant line (4) and impair its function.

 Screw, refrigerant line to engine mount/body

*BA83.30-P-1004-01T

3

Attach engine support fixture to the engine transmission unit and lift engine until the engine mount (1) is relieved.

AR01.10-P-0107MFA


When lifting, do not subject the engine mount (1) to tension.
Otherwise, damage will occur to the engine mount (1).

4

Remove screws (5).

 Screw, engine mount to body

*BA22.10-P-1001-03P

5

Remove screw (6).

 Screw, engine mount to body

*BA22.10-P-1001-03P

6

Remove screws (8).

 Screw, engine mount to cylinder head

*BA22.10-P-1002-03P

7

Remove the engine mount (1).

8

Check the engine mount (1) for damage.

If damage is identified,



Replace engine mount (1).

9

Install in the reverse order.

10

Remove positioning screw from engine mount (1).

If engine mount (1) has been replaced.

 Engine mount, engine support (engine side)

Number

Designation

Model 118, 177, 247

BA22.10-P-1001-03P

Screw, engine mount to body

M10

Nm

58

M12

Nm

106

 Engine mount, engine support (engine side)

Number

Designation

Model 118, 177, 247

BA22.10-P-1002-03P

Screw, engine mount to cylinder head

Nm

58

 Air conditioning

Number

Designation

Model 118

Model 177

BA83.30-P-1004-01T

Screw, refrigerant line to engine mount/body

M6

Nm

8

8

 Air conditioning

Number

Designation

Model 247

BA83.30-P-1004-01T

Screw, refrigerant line to engine mount/body

M6

Nm

8