D22.10-A012-78
1 | Fastening bracket | 3 | Bolts | 5 | Axle drive module | ||
2 | Screw | 4 | Bolts |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | Notes on threaded connections fastened using a tightening angle-based tightening process | ||
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
| Remove/install | ||
1 | Remove electrical vacuum pump. | ||
2 | Support axle drive module (5). | ||
| 000 588 11 62 00 Major assembly mount | ||
| 000 588 10 62 00 Support plate | ||
3 | Remove screws (2). | Screw, diagonal strut to mounting support | |
4 | Remove screw/bolts (3). | Screw, mounting support to frame | |
5 | Remove mounting support (1). | For this purpose, remove bolts (4). | |
Screw, mounting support elastomer bearing to axle drive module | |||
| Check | ||
6 | Check elastomer bearings of mounting support (1) for damage. | If damage is detected | |
| |||
replace elastomer bearing. | |||
7 | Install in the reverse order. |
Powiązane dokumenty
- ah0000p002001a Wskazówki dotyczące połączeń śrubowych tworzonych według kąta dokręcenia
- ah0000z030001a Ogólne wskazówki dotyczące pojazdów z instalacją wysokiego napięcia i/lub akumulatorem litowo-jonowym i/lub gazowym systemem napędu oraz osobistego wyposażenia ochronnego
- ar2210d0009te
- ar4305d0001te
- as0000z003501a Zagrożenie życia podczas prac przy elementach i systemach U >=30 V napięcie zmienne (AC) bądź U >=60 V napięcie zmienne
- ws0100p0092b
- ws2600p3309b