ar2040p5050oid

Remove/install fan unit

Typ ar · temat 20.40 · wersja 0200 · 2020-07-28

Dotyczy: Engine 654.9, 656 in model 167

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 20 Chłodzenie silnika › 20.40 Wentylator, sprzęgło wentylatora — Seria 167 · Seria 654 (modele 9**) · Seria 656

EinPAS 15 Silnik › 15.25 Układ chłodzenia silnika › 15.25.45 Wentylator/sprzęgło wentylatora/napęd wentylatora — Seria 167 · Seria 654 (modele 9**) · Seria 656

AR20.40-P-5050OID

Remove/install fan unit

10.06.2020

Engine

654.9, 656 in model 167

Modification notes

19.05.2020

Operation step variant added.

Operation step 5.2

19.05.2020

Operation step variant added.

Operation step 8.2

Remove/install fan unit

Shown on model 167 (except model 167.117/317)

1

Fan unit

2

Coolant line

3

Coolant line

P20.40-A002-06

Remove/install fan unit

Shown on model 167.117/317

1

Fan unit

2

Coolant line

4

Coolant line

P20.40-A047-06

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.Engine 654.9 in model 167.117/317

AS00.00-Z-0035-01A

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Warning

Risk of injury due to fan starting unexpectedly

Do not reach into the rotation or hazard area of the fan. Wear closed and close-fitting work clothes.

AS20.40-Z-0001-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

Engine 654.9 in model 167.117/317

AH00.00-Z-0300-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).

2

Remove upper engine cover.


Engine 654.9 in model 167

AR01.10-P-2405OLM

Engine 656 in model 167

AR01.10-P-2405OID

3

Remove engine air intake duct upstream of air filter.

4

Unclip automatic transmission oil cooler from fan unit (1).


Engine 654.9, 656 in model 167 with transmission 725.0

AR27.55-P-1000OID

5.1

Unclip coolant line (3) from fan unit (1).

Engine 654.9 in model 167 (except 167.117/317)
Engine 656 in model 167

5.2

Unclip coolant line (4) from fan unit (1).

Engine 654.9 in model 167.117/317

6

Unclip coolant line (2) from fan unit (1).

7

Release and disconnect electrical connector from fan unit(1).

8.1

Unclip fan unit (1) from cooler mounts and remove upward.

Engine 654.9, 656 in model 167 (except 167.117/317)

8.2

Unclip fan unit (1) from radiator mounting brackets, then guide fan unit (1) out of radiator mounting brackets at bottom and remove upwards.

Engine 654.9 in model 167.117/317

9

Install in the reverse order.

Powiązane dokumenty