ar2040d5050tsf

Remove/install fan unit

Typ ar · temat 20.40 · wersja 0200 · 2019-08-05

Dotyczy: Engine 651 in model 910

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 20 Chłodzenie silnika › 20.40 Wentylator, sprzęgło wentylatora — Seria 651 · Seria 910

EinPAS 15 Silnik › 15.25 Układ chłodzenia silnika › 15.25.45 Wentylator/sprzęgło wentylatora/napęd wentylatora — Seria 651 · Seria 910

AR20.40-D-5050TSF

Remove/install fan unit

19.07.2019

Engine

651 in model 910

Modification notes

18.07.2019

Method extended

Operation steps 6, 12

Remove/install fan unit

D20.40-1032-09

1

Fan unit

4

Electrical connector

7

Lock

2

Cover

5

Lock

8

Bracket

3

Lines

6

Radiator unit

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Warning

Risk of injury due to fan starting unexpectedly

Do not reach into the rotation or hazard area of the fan. Wear closed and close-fitting work clothes.

AS20.40-Z-0001-01A

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Warning

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating area of mechanical components when moving components.

AS00.00-Z-0009-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Remove air filter housing.

AR09.10-D-1150TSF

2

Remove cover (2).

To do this, unclip cover (2) at fan unit (1).

3

Raise vehicle.

AR00.60-D-1000-04TS

Topical note

Special instructions for lifting and supporting vehicle

AH00.60-N-0100-01TS

4

Remove lower engine compartment paneling


Engine 651 in model 910
with code XM1 (Noise reduction)

AR61.20-D-1105TS

5

Remove lines (3) from fan unit (1).

Position lines (3) outside of working area.

6

Lower vehicle.

7

Disconnect electrical connection (4).

8

Remove locks (5).

9

Press radiator unit (6) in direction of engine.


Carefully press cooler unit (6) in direction of engine.
Otherwise, damage can occur to radiator unit (6).

10

Remove fan unit (1).

To do this, pull fan unit (1) upwards out of locks (7) and brackets (8).

Installation: Ensure that fan unit (1) is seated correctly in locks (7) and brackets (8).

11

Install in the reverse order.

Check

12

Check fan unit (1) for proper operation.

Powiązane dokumenty