ar2020s7450eh

Remove/install coolant pipe

Typ ar · temat 20.20 · wersja 0100 · 2019-11-12

Dotyczy: Engine 622.8 in model 447

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 20 Chłodzenie silnika › 20.20 Chłodnica, przewody elastyczne płynu chłodzącego — Seria 447 · Seria 622 (modele 8**)

EinPAS 15 Silnik › 15.25 Układ chłodzenia silnika › 15.25.13 Przewód sztywny/elastyczny/zawór — Seria 447 · Seria 622 (modele 8**)

AR20.20-S-7450EH

Remove/install coolant pipe

28.10.2019

Engine

622.8 in model 447

Remove/install coolant pipe

S20.10-A026-79

1

Coolant pipe

2

Crankcase

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Topical note

Notes on coolant

AH20.00-N-2080-01A

Remove/install

1

Remove oil dipstick tube.

AR18.40-S-3520EH

2

Remove oil/coolant module.

AR18.20-S-4000EH

3

Push and remove coolant pipe (1) from crankcase (2) with a suitable tool.

Installation: Install new sealing rings.

Assembly tool

*000589936300

4

Install in the reverse order.

Check

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Warning

Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust.

Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area.

AS49.00-Z-0001-01A

5

Perform engine test run. While doing so, check engine for proper operation and leak tightness.

AR20.00-S-1010E

Remove/install coolant pipe

000 589 93 63 00

Assembly tool

Powiązane dokumenty