ar1840p5116mrt

Remove/install engine oil fill level sensor

Typ ar · temat 18.40 · wersja 0100 · 2018-06-08

Dotyczy: Engine 256.9 in model 222

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 18 Układ smarowania silnika, układ chłodzenia oleju › 18.40 Czujnik poziomu oleju, czujnik ciśnienia oleju — Seria 222

EinPAS 15 Silnik › 15.20 Układ smarowania silnika › 15.20.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 222

Dotyczy też silników/skrzyń biegów: 256 9**

AR18.40-P-5116MRT

Remove/install engine oil fill level sensor

18.05.2018

Engine

256.9 in model 222

Remove/install engine oil fill level sensor

Shown on vehicle with code M005 (4MATIC)

2

Bolts

3

Electrical connector

4

O-ring

B40/6

Engine oil fill level sensor

P18.40-2507-06

Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Remove/install

1

Drain engine oil.

AP18.00-P-0101MRT

Installation: Install bottom center engine compartment lining only after the leak test.

2

Release and disconnect electrical connector (3).

3

Unscrew the bolts (2) and remove the engine oil fill level sensor (B40/6).

Installation: Replace O-ring (4).

Screw/bolt, oil level sensor to oil pan lower part

*BA01.45-P-1002-01MRT

4

Install in the reverse order.

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

5

Carry out engine test run and check engine for proper leaktightness and leaktightness.

6

Install the bottom center engine compartment paneling.

AR61.20-P-1105LF

Oil pan, oil level sensor

Number

Designation

Engine 256.9

BA01.45-P-1002-01MRT

Screw/bolt, oil level sensor to oil pan lower part

Nm

8

Powiązane dokumenty