ar1540d5032tsm

Remove/install alternator

Typ ar · temat 15.40 · wersja 0100 · 2020-07-20

Dotyczy: Engine 654.9 in model 907.1/2/6

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 15 Instalacja elektryczna silnika › 15.40 Alternator — Seria 654 (modele 9**) · Seria 907 (modele 1**, 2**, 6**)

EinPAS 25 Instalacja elektryczna/sieć wymiany danych/wielofunkcyjne › 25.20 Sieć pojazdu › 25.20.30 Alternator — Seria 654 (modele 9**) · Seria 907 (modele 1**, 2**, 6**)

AR15.40-D-5032TSM

Remove/install alternator

17.03.2020

Engine

654.9 in model 907.1/2/6

Remove/install alternator

D15.40-A005-79

1

Alternator

3

Electrical line B+

4

Nut

2

Cap

Remove/install alternator

D15.40-A006-78

1

Alternator

5

Bolts

6

Electrical connection D+

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Detach ground line of on-board electrical system battery.

AR54.10-D-0029TS

2

Remove poly-V-belt guide pulley.

AR13.20-D-0015TSM

3

Remove mixer housing.

Engine 654.9 in model 907.1/2/6
with code HH4 (THERMOTRONIC automatic climate control)
Engine 654.9 in model 907.1/2/6
with code HH9 (Air conditioner, automatic heater control)

AR09.20-D-1320TSM

4

Remove windshield washer system washer fluid reservoir and place to one side with connected lines.

Engine 654.9 in model 907.1/2/6
except code HH4 (THERMOTRONIC automatic climate control)
except code HH9 (Air conditioner, automatic heater control)

AR82.35-D-6000TSR

5

Pull off the cap (2) and remove the nut (4).

Nut, circuit B+ to alternator

*BA15.40-N-1001-01TSM

6

Remove electrical line B+ (3) from the alternator (1) and place to one side.

7

Remove bolts (5).

Screw, alternator to major assembly carrier/oil filter

*BA15.40-N-1002-01TSM

8

Remove the alternator (1).

9

Pull the alternator (1) forward until electrical connection D+ (6) can be accessed.

10

Disconnect electrical connection D+ (6).

11

Remove the alternator (1).

12

Install in the reverse order.

Check

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

13

Perform an engine test run and check the alternator (1) for proper operation.

Alternator

Number

Designation

Engine 654.9 in model 907

BA15.40-N-1001-01TSM

Nut, circuit B+ to alternator

Nm

17

Alternator

Number

Designation

Engine 654.9 in model 907

BA15.40-N-1002-01TSM

Screw, alternator to major assembly carrier/oil filter

Nm

20

Powiązane dokumenty