P15.10-2528-09
1 | Electrical connector | 3 | Sealing ring | |
2 | Screw | B6/1 | Camshaft Hall sensor |
Danger ! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
| Remove/install | ||
1 | Remove engine cover | Installation: Ensure correct seating. | |
2 | Disconnect electrical connection (1) on camshaft Hall sensor (B6/1) | ||
3 | Remove screw/bolt (2) | Camshaft position sensor on cylinder head cover | |
4 | Take out camshaft Hall sensor (B6/1) | Installation: Replace compression ring (3). | |
5 | Install in the reverse order |
Powiązane dokumenty
- as0000z001101a Niebezpieczeństwo zranienia przez zakleszczenie lub zmiażdżenie palców podczas demontażu, montażu i prac regulacyjnych przy pokrywach, drzwiach i oknie dachowym.