ar1440b3020a

Remove/install AdBlue metering device

Typ ar · temat 14.40 · wersja 0103 · 2019-07-24

Dotyczy: Engine 457.9 in model 634.0 with code MS5 (Euro V) with Liquid Only Engine 457.9 in model 695.023/053 with code MS5 (Euro V) with Liquid Only Engine 924.9 in model 979.0 with code MS5 (Euro V) with Liquid Only Engine 924.9, 926.9 in model 368.002/004/006/100/104/106/115/117, 382.1, 384.0/223, 685.282/284/289/290/295, 979.2 with code MS5 (Euro V) with Liquid Only Engine 924.9, 926.9 in model 958.1 with code MS5 (BlueTec 5) with Liquid Only

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 14 Kolektor wydechowy, hamulec silnikowy, instalacja oczyszczania spalin › 14.40 Układ oczyszczania spalin, AdBlue — Seria 368 (modele 002, 004, 006, 100, 104, 106, 115, 117) · Seria 382 (modele 1**) · Seria 384 (modele 0**, 223) · Seria 634 (modele 0**) · Seria 685 (modele 282, 284, 289, 290, 295) · Seria 695 (modele 023, 053) · Seria 958 (modele 1**) · Seria 979 (modele 0**, 2**)

EinPAS 15 Silnik › 15.40 Układ wydechowy/ układ oczyszczania spalin › 15.40.51 Pompa/dozownik/dysza — Seria 368 (modele 002, 004, 006, 100, 104, 106, 115, 117) · Seria 382 (modele 1**) · Seria 384 (modele 0**, 223) · Seria 634 (modele 0**) · Seria 685 (modele 282, 284, 289, 290, 295) · Seria 695 (modele 023, 053) · Seria 958 (modele 1**) · Seria 979 (modele 0**, 2**)

Dotyczy też silników/skrzyń biegów: 457 9**, 924 9**, 926 9**

AR14.40-B-3020A

Remove/install AdBlue metering device

23.07.2019

Engine

457.9 in model 634.0

with code MS5 (Euro V)

with Liquid Only

Engine

457.9 in model 695.023/053

with code MS5 (Euro V)

with Liquid Only

Engine

924.9 in model 979.0

with code MS5 (Euro V)

with Liquid Only

Engine

924.9, 926.9 in model 368.002/004/006/100/104/106/115/117, 382.1, 384.0/223, 685.282/284/289/290/295, 979.2

with code MS5 (Euro V)

with Liquid Only

Engine

924.9, 926.9 in model 958.1

with code MS5 (BlueTec 5)

with Liquid Only

Remove/install AdBlue metering device

1

Exhaust gas after-treatment unit

2

Exhaust pipe

3

Electrical connector

4

Urea return piping

5

Urea supply piping

6

Bolts

7

Seal

A67

Metering unit

B14.40-0168-06

Remove/install

Warning

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

1

Turn off ignition

Notes on use, material properties and handling of AdBlue®

AH14.40-B-0001-01A

2

Detach the electrical connector (3)

3

Remove the urea return piping (4)

Collect and dispose the drained fluid.

4

Remove the urea supply piping (5)

Collect and dispose the drained fluid.

5

Remove the dosing unit (A67) from the exhaust pipe (2) in the exhaust gas treatment unit (1)

Installation: Replace the gasket (7) and the bolts (6).

.AdBlue dosing device in the exhaust gases after-treatment unit

*BA14.40-B-1002-02G

6

Install in reverse order

Check

7

Check the tightness in the piping junction points

Visual inspection.

Exhaust gas after-treatment

Number

Designation

Engine 457.9, 924.9, 926.9 with Liquid Only

BA14.40-B-1002-02G

AdBlue dosing device in the exhaust gases after-treatment unit

Nm

10

Powiązane dokumenty