ar1440b2056a

Remove/install filter in inlet of AdBlue metering device

Typ ar · temat 14.40 · wersja 0103 · 2019-07-24

Dotyczy: Engine 457.9 in model 634.0 with code MS5 (Euro V) with Liquid Only Engine 457.9 in model 695.023/053 with code MS5 (Euro V) with Liquid Only Engine 924.9 in model 979.0 with code MS5 (Euro V) with Liquid Only Engine 924.9, 926.9 in model 368.002/004/006/100/104/106/115/117, 382.1, 384.0/223, 685.282/284/289/290/295, 979.2 with code MS5 (Euro V) with Liquid Only Engine 924.9, 926.9 in model 958.1 with code MS5 (BlueTec 5) with Liquid Only

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 14 Kolektor wydechowy, hamulec silnikowy, instalacja oczyszczania spalin › 14.40 Układ oczyszczania spalin, AdBlue — Seria 368 (modele 002, 004, 006, 100, 104, 106, 115, 117) · Seria 382 (modele 1**) · Seria 384 (modele 0**, 223) · Seria 634 (modele 0**) · Seria 685 (modele 282, 284, 289, 290, 295) · Seria 695 (modele 023, 053) · Seria 958 (modele 1**) · Seria 979 (modele 0**, 2**)

EinPAS 15 Silnik › 15.40 Układ wydechowy/ układ oczyszczania spalin › 15.40.51 Pompa/dozownik/dysza — Seria 368 (modele 002, 004, 006, 100, 104, 106, 115, 117) · Seria 382 (modele 1**) · Seria 384 (modele 0**, 223) · Seria 634 (modele 0**) · Seria 685 (modele 282, 284, 289, 290, 295) · Seria 695 (modele 023, 053) · Seria 958 (modele 1**) · Seria 979 (modele 0**, 2**)

Dotyczy też silników/skrzyń biegów: 457 9**, 924 9**, 926 9**

AR14.40-B-2056A

Remove/install filter in inlet of AdBlue metering device

23.07.2019

Engine

457.9 in model 634.0

with code MS5 (Euro V)

with Liquid Only

Engine

457.9 in model 695.023/053

with code MS5 (Euro V)

with Liquid Only

Engine

924.9 in model 979.0

with code MS5 (Euro V)

with Liquid Only

Engine

924.9, 926.9 in model 368.002/004/006/100/104/106/115/117, 382.1, 384.0/223, 685.282/284/289/290/295, 979.2

with code MS5 (Euro V)

with Liquid Only

Engine

924.9, 926.9 in model 958.1

with code MS5 (BlueTec 5)

with Liquid Only

Remove/install filter in inlet of AdBlue metering device

W14.40-1635-09

1

Metering unit

4

Connecting pieces

6

Coupling nozzle

2

Urea inlet

5

Bolts

7

Holes

3

Filter

Remove

Warning

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

1

Remove the metering unit (1)

Notes on use, material properties and handling of AdBlue®

AH14.40-B-0001-01A

.

AR14.40-B-3020A

2

Remove the coupling nozzle (6) in the dosing unit (1)

3

Lift out the filter (3)

A thin nosed pliers may be used as tool.

4

Remove the connecting pieces (4)

Do not re-utilize the connecting pieces (4)

5

Remove the bolts (5)

Do not re-utilize the bolts (5).

6

Clean the mating surfaces on the metering unit (1) and on the coupling opening (6)


Ensure that no dirt between holes:
This may cause the dosing unit to be clogged (1).

Install

7

Install a new filter (3) in the urea inlet (2)

8

Insert the new linking pieces (4) in the bores (7) (arrow)

The new linking pieces (4) are to be pressed in against stop in the bores (7).

9

Install the coupling opening (6) in the metering unit (1) with new bolts (5)

.AdBlue piping coupling nozzle in the dosing device

*BA14.40-B-1005-02G

10

Install the metering unit (1)


.

AR14.40-B-3020A

Exhaust gas after-treatment

Number

Designation

Engine 457.9, 924.9, 926.9 with Liquid Only

BA14.40-B-1005-02G

AdBlue piping coupling nozzle in the dosing device

Nm

22

Powiązane dokumenty