ar1322p1202fg

Remove/install poly-V-belt

Typ ar · temat 13.22 · wersja 0100 · 2004-07-01

Dotyczy: ENGINE 639.939 in MODEL 454.0

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 13 Sprężarka powietrza, napędy pasowe › 13.22 Napęd jednopasowy — Seria 454 (modele 0**) · Seria 639 (modele 939)

EinPAS 15 Silnik › 15.18 Napęd paskowy › 15.18.30 Pasek/koło pasowe/koło bierne/napinacz — Seria 454 (modele 0**) · Seria 639 (modele 939)

AR13.22-P-1202FG

Remove/install poly-V-belt

24.5.04

ENGINE 639.939 in MODEL 454.0

Remove/install poly-V-belt

P13.22-2097-07

Shown on vehicles with CODE (I01) air conditioning system Plus (with outside temperature indicator) (FFO)

2 Poly-V-belt

1 Tensioning device

Remove/Install

1

Remove lower engine compartment paneling

AR61.20-P-1105FF

2

Tension the tensioning device (1) against the spring force and block with a suitable Allen wrench (arrowed)

3

Remove poly-V-belt (2)

Installation: Check the poly-V-belt (2) for wear and damage, and replace if necessary.

Refer to:

Inspect poly-V-belt for wear and damage

AP13.22-P-1351FF

4

Install in the reverse order

Danger!

Risk of accident caused by vehicle starting off when engine is running. Risk of injury caused by contusions and burns when working in engine during starting procedure

Secure vehicle to prevent it from moving.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

5

Carry out an engine test run and check that poly-V-belt (2) runs correctly

Powiązane dokumenty