ar6120p1105ff

Remove/install bottom engine compartment paneling

Typ ar · temat 61.20 · wersja 0102 · 2006-06-22

Dotyczy: MODEL 454.0

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 61 Część dolna › 61.20 Dolna wykładzina komory silnika — Seria 454 (modele 0**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.25 Element tłumiący/okładzina dolna/uszczelnienie/osłona dolna › 35.25.41 Osłona spodu płyty podłogowej/osłona przeciwhałasowa/osłona dolna — Seria 454 (modele 0**)

AR61.20-P-1105FF

Remove/install bottom engine compartment paneling

9.6.06

MODEL 454.0

Remove/install bottom engine compartment paneling

P61.20-2056-11

Shown on vehicle with code (I60) Stationary heater, gasoline

1 Engine compartment lining

2 Profile rubber element (on vehicles with code (I58) Stationary heater, diesel or code (I60) Stationary heater, gasoline )

3 Exhaust line (on vehicles with code (I58) Stationary heater, diesel or code (I60) Stationary heater, gasoline )

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Raise vehicle

2.1

Press profile rubber element (2) with exhaust line (3) upward through hole into engine compartment paneling (1)

Only on vehicles with code (I58) Stationary heater, diesel or code (I60) Stationary heater, gasoline

Installation: Ensure that profile rubber element (2) is seated correctly in engine compartment paneling (1).

3

Remove clips from engine compartment paneling (1).

4

Pull out engine compartment paneling (1) toward rear

5

Install in the reverse order

Powiązane dokumenty