S09.41-4632-09
1 | Throttle valve actuator | 3 | Bolts | |
2 | Electrical connector | 4 | Bracket |
| Remove/install | ||
1 | Remove charge air pipe on throttle valve actuator | ||
2 | Remove electrical wiring harness from bracket (4) | ||
3 | Disconnect electrical connection (2) | ||
4 | Remove screws/bolts (3) | Bolt, throttle valve actuator to charge air distributor | |
5 | Remove throttle valve actuator (1) | Installation: Check seal on throttle valve actuator (1). | |
Depending on findings | |||
| |||
Replace seal. | |||
6 | Install in the reverse order | ||
7 | Connect diagnostic system and perform initialization of throttle valve actuator (1) | Only when replacing throttle valve actuator (1). | |
| Connect/disconnect diagnostic unit | ||
8 | Close off diagnostic system | ||
| Connect/disconnect diagnostic unit | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
9 | Check for leaktightness with engine running | Perform visual inspection only. |
Powiązane dokumenty
- ad0000s200006p
- ar0941s0015pd
- as0000z000501a Niebezpieczeństwo wypadku na skutek samoczynnego ruszenia przy pracującym silniku. Niebezpieczeństwo obrażeń na skutek zmiażdżenia lub poparzenia przy wykonywaniu czynności podczas rozruchu lub przy pracującym silniku.