ar0940s6035ef

Remove/install turbocharger oil feed line

Typ ar · temat 09.40 · wersja 0101 · 2019-09-17

Dotyczy: Model 447 with engine 622

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 09 Zasysanie powietrza, doładowanie › 09.40 Turbosprężarka — Seria 447 · Seria 622

EinPAS 15 Silnik › 15.20 Układ smarowania silnika › 15.20.13 Przewód sztywny/elastyczny/zawór — Seria 447 · Seria 622

AR09.40-S-6035EF

Remove/install turbocharger oil feed line

09.08.2019

Model

447 with engine 622

Remove/install turbocharger oil feed line

Shown on engine 622.9

1

Screw

2

Screw

3

Screw

4

Line

S09.40-A035-06

Remove/install turbocharger oil feed line

S09.40-A033-79

Shown on engine 622.8

1

Screw

3

Screw

2

Screw

4

Line

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1.1

Remove diesel particulate filter.

Model 447 with engine 622.9

AR14.40-S-1000EF

1.2

Remove exhaust gas aftertreatment unit.

Model 447 with engine 622.8

AR49.20-S-1500EH

2

Remove screw/bolt (1).

Bolt, line for oil feed of turbocharger to crankcase

*BA09.40-N-1003-02E

3

Remove screw (2).

4

Remove screw (3) .

Bolt, line for oil feed of turbocharger to turbocharger

*BA09.40-N-1002-02E

5.1

Remove line (4) upward.

Model 447 with engine 622.9

Installation: Always replace line (4).

5.2

Remove line (4) downward.

Model 447 with engine 622.8

Installation: Always replace line (4).

6

Install in the reverse order.

Check

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Warning

Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust.

Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area.

AS49.00-Z-0001-01A

7

Carry out an engine test run; check engine for leak tightness while doing so.

Turbocharger

Number

Designation

Engine 622 in model 447

BA09.40-N-1002-02E

Bolt, line for oil feed of turbocharger to turbocharger

Nm

16

Turbocharger

Number

Designation

Engine 622 in model 447

BA09.40-N-1003-02E

Bolt, line for oil feed of turbocharger to crankcase

Nm

16

Powiązane dokumenty