P09.20-2220-06
Shown on engine 132.930 up to 30.8.10
1 Resonance reservoir
2 Vacuum hose
3 Hose clamp
4 Vent hose for crankcase
5 Electrical line
6 Hose clamp
7 Guide pin
| Remove/install | ||
1 | Lower rear drive module | ||
2 | Remove catalytic converter | Up to 30.8.10 | |
As of 31.8.10 | |||
3 | Detach vacuum hose (2) at resonance container (1) | ||
4 | Release hose clamp (3) and detach resonance container (1) on turbocharger | Close off opening at turbocharger. | |
Set of protective covers | |||
5 | Detach crankcase vent hose (4) from resonator (1) | ||
6 | Unclip electrical line (5) at resonance container (1) | ||
7 | Release hose clamp (6) and detach resonance container (1) on air filter housing | ||
8 | Unscrew bolts (7) and remove resonator (1) | Installation: The resonance container (1) must noticeably engage on the pilot stud (7). | |
9 | Install in the reverse order |
Set of protective covers
001 589 02 91 00