ar0920p0010mcb

Remove/install resonance chamber

Type ar · topic 09.20 · version 0102 · 2010-07-21

Applies to: ENGINES 132.930 in MODEL 451.3 /4

Where it sits

Function group 1 Engine › 09 Air intake, turbocharging › 09.20 Intake manifold, intake manifold preheater — Series 451 (models 3**, 4**)

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.33 Intake manifold/charge air pipe — Series 451 (models 3**, 4**)

Also applies to engines/gearboxes: 132 930

AR09.20-P-0010MCB

Remove/install resonance chamber

13.7.10

ENGINES 132.930 in MODEL 451.3 /4

Remove/install resonance chamber

P09.20-2220-06

Shown on engine 132.930 up to 30.8.10

1 Resonance reservoir

2 Vacuum hose

3 Hose clamp

4 Vent hose for crankcase

5 Electrical line

6 Hose clamp

7 Guide pin

Remove/install

1

Lower rear drive module

AR01.00-P-3050MCC

2

Remove catalytic converter

Up to 30.8.10

AR49.10-P-5500MCC

As of 31.8.10

AR49.10-P-5500MCF

3

Detach vacuum hose (2) at resonance container (1)

4

Release hose clamp (3) and detach resonance container (1) on turbocharger

Close off opening at turbocharger.

Set of protective covers

*001589029100

5

Detach crankcase vent hose (4) from resonator (1)

6

Unclip electrical line (5) at resonance container (1)

7

Release hose clamp (6) and detach resonance container (1) on air filter housing

8

Unscrew bolts (7) and remove resonator (1)

Installation: The resonance container (1) must noticeably engage on the pilot stud (7).

9

Install in the reverse order

Remove/install resonance chamber

Set of protective covers

001 589 02 91 00

Referenced documents