ar0850p0050eq

Remove/install coolant lines for coolant circuit of high-voltage battery

Typ ar · temat 08.50 · wersja 0100 · 2020-04-17

Dotyczy: Model 293

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 08 Napęd elektryczny, napęd hybrydowy › 08.50 Zarządzanie temperaturą — Seria 293

EinPAS 16 Zasilanie paliwem/ energią silnika › 16.25 Chłodzenie/ogrzewanie instalacji wysokiego napięcia/ogniwa paliwowego › 16.25.13 Przewód sztywny/elastyczny/zawór — Seria 293

AR08.50-P-0050EQ

Remove/install coolant lines for coolant circuit of high-voltage battery

19.03.2020

Model

293

Remove/install coolant lines for coolant circuit of high-voltage battery

P08.50-A064-79

1

Bracket

4

Retaining clips

2

Nut

5

Coolant lines

3

Nuts

A100g1

High-voltage battery

Remove/install coolant lines for coolant circuit of high-voltage battery

5

Coolant lines

6

Connection fitting

P08.50-A065-81

Danger

Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC.

No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

AH00.00-Z-0300-01A

Topical note

Notes on battery

AH54.10-P-0001-01A

Topical note

Notes on coolant

AH20.00-N-2080-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Remove/install

1

Remove high-voltage battery (A100g1).

AR47.70-P-0002EQ

2

Remove nuts of brackets (1) and release bracket (1).

3

Remove nuts (2).


Do not support on high-voltage battery (A100g1).
Otherwise damage may occur.

4

Remove nuts (3).

5

Unclip retaining clips (4).

6

Release safety clip outwards (arrow A), press in locks on both sides (arrows B) and remove coolant lines (5) from high-voltage battery (A100g1).


Nuts of connection fitting (6) may not be released.
Leaks can occur otherwise.

7

Seal connections of coolant lines (5) and high-voltage battery (A100g1) with suitable stop plugs.

Collect escaping coolant with dry cloths.

Record plug

*129589009100

8

Remove coolant lines (5).

9

Install in the reverse order.

Remove/install coolant lines for coolant circuit of high-voltage battery

129 589 00 91 00

Record plug

Powiązane dokumenty