Check coolant main circuit for leaktightness

AR08.50-P-0013EQ

Check coolant main circuit for leaktightness

03.12.2019

Model

293

1

Cap

2

Coolant expansion reservoir

3

Tester cap

4

Pressure pump

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

 Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Topical note

General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system

AH00.00-Z-0300-01A

Topical note

Notes on coolant

AH20.00-N-2080-01A



Check

1

Remove engine cover.



AP01.10-P-2405-01J

2

Slowly open cap (1) on the coolant expansion reservoir (2) of the main circuit and remove.

3

Check coolant level and correct.



AP20.30-P-2052O

4

Install tester cap (3) on coolant expansion reservoir (2).

 Test cap

*210589009100

5

Connect pressure pump (4) at tester cap (3).

 Pressure pump

*124589242100

6

Apply test pressure to the coolant main circuit for 2 min.


Do not exceed the specified test pressure.
Otherwise damage to the coolant main circuit will occur.

 There must not be any pressure loss within 2 min.

Test pressure for pressure-testing the main circuit

*BE08.50-P-1001-01A

If there is a problem,



replace corresponding component part.

7

Remove tester cap (3).

8

Remove pressure pump (4) from tester cap (3).

9

Relieve test pressure via valve on pressure pump (4).

10

Check coolant level and correct.



AP20.30-P-2052O

11

Install cap (1).

12

Install engine cover.



AP01.10-P-2405-01J

Cooling system

Number

Designation

Engine 780 in model 293

BE08.50-P-1001-01A

Test pressure for pressure-testing the main circuit

bar

1,5