AR07.52-S-1462B | Removing and installing coolant temperature sensors | 28.5.97 |
ENGINE 104.900 in MODEL 638.2
S07.52-2500-06
1 Bracket
2 Connector
3 Coolant temperature sensor
4 Clips
5 Coolant thermostat
6 Seals
7 Bolt
| Removing, installing | ||
Danger! | Risk of injury to skin and eyes from scalding from hot coolant which splashes out. Risk of poisoning from swallowing coolant. | Do not open the cooling system unless the coolant temperature is below 90 °C. Open cap slowly and allow the pressure to release. Do not pour coolant into containers for drinks. Wear protective gloves, protective clothes, and eye protection. | |
1 | Drain coolant | ||
2 | Unbolt bracket (1) of injection nozzle connector (2) | | |
3 | Separate plug connections of coolant temperature sensors (3) | Only one coolant temperature sensor (3) is fitted to model 638.294 with engine 104.900. | |
4 | Take off clips (4) of coolant temperature sensor (3) at coolant thermostat (5) | Only one coolant temperature sensor (3) is fitted to model 638.294 with engine 104.900. | |
5 | Remove coolant temperature sensor (3) | Installation: replace seals (6). | |
6 | Install in the reverse order | ||
| Inspecting | ||
7 | Inspect cooling system for leaks |
HFM-SFI fuel injection and ignition system
Powiązane dokumenty
- ar2000s1010a
- ar2000s1142a
- as2000z000101a Niebezpieczeństwo zranienia skóry i oczu przez poparzenie wytryskującym, gorącympłynem chłodzącym. Niebezpieczeństwo zatrucia na skutek połknięcia płynu chłodzącego