ar0716d1090tsm

Remove/install common rail diesel injection system (CDI) coolant temperature sensor

Typ ar · temat 07.16 · wersja 0100 · 2020-03-20

Dotyczy: Engine 654.9 in model 907.1/2/6

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 07 Przygotowanie mieszanki › 07.16 Wysokoprężny układ wtryskowy Common-Rail — Seria 654 (modele 9**) · Seria 907 (modele 1**, 2**, 6**)

EinPAS 15 Silnik › 15.25 Układ chłodzenia silnika › 15.25.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 654 (modele 9**) · Seria 907 (modele 1**, 2**, 6**)

AR07.16-D-1090TSM

Remove/install common rail diesel injection system (CDI) coolant temperature sensor

05.03.2020

Engine

654.9 in model 907.1/2/6

Remove/install common rail diesel injection system (CDI) coolant temperature    
	sensor

D07.16-A010-79

1

Coolant temperature sensor

3

Securing clamp

5

Thermostat housing

2

Electrical connector

4

Sealing ring

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Drain off coolant.

AR20.00-D-1142TSM

2

Release and disconnect the electrical connector (2).

3

Remove the securing clamp (3).

4

Pull coolant temperature sensor (1) out of the thermostat housing (5).

Collect escaping coolant.

Check

5

Check sealing ring (4) for damage.

If there is a problem,

replace coolant temperature sensor (1).

6

Install in the reverse order.

Check

7

Read out and delete fault memory.

If a new coolant temperature sensor (1) was installed.

AD00.00-D-2000-06TS

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

8

Perform engine test run and check coolant circuit in the area of the coolant temperature sensor (1) for leak tightness.

Powiązane dokumenty