ar0716d1050na

Remove/install rail pressure sensor

Typ ar · temat 07.16 · wersja 0108 · 2004-05-24

Dotyczy: ENGINE 612.981 ## up to 846434 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 ENGINE 612.981 ## up to 846434 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada ENGINE 612.981 ## up to 846434 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA ENGINE 612.981 ## up to 846434 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 07 Przygotowanie mieszanki › 07.16 Wysokoprężny układ wtryskowy Common-Rail — Seria 903 (modele 61*, 62*, 66*, 67*) · Seria 904 (modele 61*, 62*, 66*)

EinPAS 15 Silnik › 15.45 Sterowanie pracą silnika › 15.45.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 903 (modele 61*, 62*, 66*, 67*) · Seria 904 (modele 61*, 62*, 66*)

Dotyczy też silników/skrzyń biegów: 612 981

AR07.16-D-1050NA

Remove/install rail pressure sensor

15.1.01

ENGINE 612.981 ## up to 846434 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

ENGINE 612.981 ## up to 846434 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada

ENGINE 612.981 ## up to 846434 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA

ENGINE 612.981 ## up to 846434 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

Remove/install rail pressure sensor

D07.16-1115-05

1 Rail pressure sensor

2 Connector

3 Sealing ring

4 Rail

5 Mixing chamber

Remove/Install

Danger!

Risk of explosion caused by ignition of flammable products, risk of poisoning caused by inhaling fuel vapors or swallowing fuel as well as risk of injury to skin and eyes exposed to fuel.

No fire, sparks, open flames or smoking.
Pour fuels only into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

1

Remove mixing housing (5)

AR09.20-D-1320B

2

Unplug connector (2) at rail pressure sensor (1)

3

Unbolt rail pressure sensor (1) from the rail (4)

Counter-hold threaded connection at rail (4).

Replace seal (3). Clean sealing surface.

*BA07.16-P-1003-01A

4

Install in the reverse order

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns when working in engine during starting procedure

Secure vehicle to prevent it from moving.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

Danger!

Risk of explosion caused by ignition or explosion of fuel. Risk of injury to skin and eyes caused by fuel jets or leakage.

Keep all ignition sources out of hazard area.

Do not carry out any work on the system when it is pressurized.

AS07.16-Z-0001-01A

5

Inspect fuel system for leaks

Run engine, switch off and inspect for leaks.

Common rail diesel injection (CDI)

Number

Designation

Engine 612.981

BA07.16-P-1003-01A

Rail pressure sensor on rail

to production no.

86512

Nm

-

as of production no.

86513

Nm

-

as of production no.

96513

Nm

-

up to engine no.

835762

Nm

-

as of engine no.

835763

Nm

-

up to engine no.

846434

Nm

22

as of engine no.

846435

Nm

70

Powiązane dokumenty