ar0708d7006r

Remove/install electronic diesel system (EDS) control unit

Typ ar · temat 07.08 · wersja 0101 · 2015-02-02

Dotyczy: ENGINE 646 in MODEL 909

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 07 Przygotowanie mieszanki › 07.08 Moduły sterujące — Seria 646 · Seria 909

EinPAS 15 Silnik › 15.45 Sterowanie pracą silnika › 15.45.11 Moduł sterujący/ przekaźnik — Seria 646 · Seria 909

AR07.08-D-7006R

Remove/install electronic diesel system (EDS) control unit

18.12.2014

ENGINE

646 in MODEL 909

Remove/install electronic diesel system (EDS) control unit

2

Lock lever

3

Electrical connections

4

Nuts

5

Screw/bolts

6

Retaining frame

N3/21

CDI control unit

D07.08-1120-06

Danger !

Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries

No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Read out variant coding for CDI control unit (N3/21)

When replacing CDI control unit (N3/21)

AD00.00-D-2000-04F

2

Remove battery

Notes on battery

AH54.10-P-0001-01A

3

Remove battery carrier

4

Unfasten lock lever (2) and disconnect electrical connection (3) on CDI control unit (N3/21)

Installation: Ensure correct seating of seals in the electrical connections (3).

5

Unscrew nuts (4)

6

Remove CDI control unit (N3/21) and retaining frame (6)

7

Remove screw/bolts (5)

8

Remove CDI control unit (N3/21) to the front (arrow) from retaining frame (6)

9

Install in the reverse order

10

Connect diagnostic system, read out fault memory and delete if necessary

AD00.00-D-2000-04F

Powiązane dokumenty