AR07.04-P-0005MCD | Remove/install diesel particulate filter temperature sensor | 2.12.09 |
ENGINE 660.9 in MODEL 451.3 /4 with CODE (474) Diesel particulate filter (closed)
P07.04-2680-06
1 Rear muffler with catalytic converter diesel particulate filter unit
2 Cable tie
3 Union nut
B19/9 Exhaust gas temperature sensor upstream of diesel particulate filter (DPF)
B19/9x1 Electrical connector for exhaust temperature sensor upstream of diesel particulate filter (DPF)
| Remove/install | ||
1 | Remove rear CBS | ||
Danger! | Risk of death caused by vehicle slipping or toppling off the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | |
2 | Raise vehicle with vehicle lift | ||
3 | Remove cable tie (2) | Installation: Lay wiring harness for the exhaust temperature sensor upstream of diesel particulate filter (DPF) (B19/9) in a strap and fix in place using a cable tie (2). | |
4 | Disconnect electrical connector of exhaust temperature sensor upstream of diesel particulate filter (DPF) (B19/9x1). | ||
5 | Unscrew union nut (3) on the exhaust temperature sensor upstream of diesel particulate filter (DPF) (B19/9) | | |
6 | Remove exhaust temperature sensor upstream of diesel particulate filter (DPF) (B19/9) from the rear muffler with catalytic converter diesel particulate filter unit (1) | ||
7 | Install in the reverse order | ||
8 | Read out fault memory, erase if necessary | ||
| Connect STAR DIAGNOSIS and read out fault memory |
Sensors
Powiązane dokumenty
- ad0000p200004mcc
- ar8820p1900mcc
- as0000z001001a Zagrożenie życia na skutek ześlizgnięcia lub spadnięcia pojazdu z podnośnika.