ar0704d0020r

Remove/install fuel temperature sensor

Typ ar · temat 07.04 · wersja 0100 · 2013-08-19

Dotyczy: ENGINE 646 in MODEL 909

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 07 Przygotowanie mieszanki › 07.04 Czujniki — Seria 646 · Seria 909

EinPAS 15 Silnik › 15.45 Sterowanie pracą silnika › 15.45.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 646 · Seria 909

AR07.04-D-0020R

Remove/install fuel temperature sensor

29.07.2013

ENGINE

646 in MODEL 909

Remove/install fuel temperature sensor

2

Electrical line

B50

Fuel temperature sensor

D07.04-1206-04

Danger !

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Remove/install

1

Open engine hood

AR88.40-D-3000F

2

Remove heat shield from turbocharger

3

Disconnect electrical line (2) from fuel temperature sensor (B50)

4

Remove fuel temperature sensor (B50)

Installation: Replace sealing ring.

Catch escaping fuel.

Fuel temperature sensor on high-pressure pump

*BA07.04-N-1004-01B

5

Install in the reverse order

Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Performa and engine test run, stop engine and check fuel system in the area of the fuel temperature sensor (B50) for leaktightness

Sensors, transmitters

Number

Designation

ENGINE 646.7 in MODEL 909

BA07.04-N-1004-01B

Fuel temperature sensor on high-pressure pump

Nm

28

Powiązane dokumenty