ar0703s7000e

Remove/install pressure line from high-pressure pump/fuel distributor

Typ ar · temat 07.03 · wersja 0201 · 2019-04-30

Dotyczy: Model 447 with engine 651

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 07 Przygotowanie mieszanki › 07.03 Wtryskiwacze, zawory wtryskiwaczy — Seria 447 · Seria 651

EinPAS 15 Silnik › 15.45 Sterowanie pracą silnika › 15.45.13 Przewód sztywny/elastyczny/zawór — Seria 447 · Seria 651

AR07.03-S-7000E

Remove/install pressure line from high-pressure pump/fuel distributor

18.04.2019

Model

447 with engine 651

Modification notes

17.11.2014

Method completely revised

Operation steps 1 to 16

AR01.00-S-2411-01E

Remove/install pressure line from high-pressure pump/fuel distributor

1

High pressure pipe

2

Screw

3

Union nut

4

Cable duct

5

Union nut

S07.03-4533-06

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Danger

Risk of explosion caused by fuel igniting. Risk of injury to skin and eyes caused by fuel spraying out at high pressure

Keep all ignition sources out of hazard area.
Do not carry out any work on system when it is pressurized.

AS07.16-Z-0001-01A

Danger

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Notes about Common-Rail components

AH07.16-P-0002-01TX

Remove/install

1

Remove exhaust gas recirculation valve

AR14.20-S-7662E

2

Remove screw/bolts (2)

3

Detach cable duct (4)

AR01.00-S-2411-01E

The union nut (5) must be accessible.

4

Remove high-pressure line (1)

To do this unscrew union nuts (3, 5); unclip bracket for fuel line and remove high-pressure line (1).

Union nut, pressure line to high-pressure pump/rail

*BA07.16-N-1019-01A

Box wrench bit

*000589680300

5

Install in the reverse order

Common rail diesel injection (CDI)

Number

Designation

Engine 651 in model 447

BA07.16-N-1019-01A

Union nut, pressure line to high-pressure pump/rail

Stage 1

Nm

7

Stage 2

Nm

33

Remove/install pressure line from high-pressure pump/fuel distributor

000 589 68 03 00

Box wrench bit

Powiązane dokumenty