ar0703p1450sr

Remove fuel distributor with injection valves

Typ ar · temat 07.03 · wersja 0100 · 2014-08-08

Dotyczy: ENGINE 281 in MODEL 453

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 07 Przygotowanie mieszanki › 07.03 Wtryskiwacze, zawory wtryskiwaczy — Seria 453

EinPAS 15 Silnik › 15.45 Sterowanie pracą silnika › 15.45.42 Rozdzielacz paliwa/kolektor rozprowadzający paliwo/dysza/wtryskiwacz — Seria 453

Dotyczy też silników/skrzyń biegów: 281 ***

AR07.03-P-1450SR

Remove fuel distributor with injection valves

23.07.2014

ENGINE

281 in MODEL 453

Remove fuel distributor with injection valves

Shown on engine 281.920

1

Fuel distributor

2

Electrical connections

3

Fuel line

4

Screw/bolt

P07.03-2346-06

Danger !

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove covering over engine

Installation: Only install covering over engine after the leak test.

2

Separate electrical connections (2)

3

Unlock and detach fuel line (3) on fuel distributor (1)

Catch leaking fuel in a suitable vessel.

4

Remove screws/bolts (4)

ENGINE 281.910 in MODEL 453

*BA07.52-P-1002-01D

ENGINE 281.920 in MODEL 453

*BA07.52-P-1001-01D

5

Remove fuel distributor (1) together with fuel injection valves

Installation: Replace sealing rings for injection valves.

6

Install in the reverse order

Check

Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

7

Perform an engine test run and check engine for leaktightness around fuel distributor (1)

Fuel distributor

Number

Designation

ENGINE 281

BA07.52-P-1001-01D

Screw/bolt, fuel distributor to intake manifold

Nm

10

Fuel distributor

Number

Designation

ENGINE 281

BA07.52-P-1002-01D

Screw/bolt, fuel distributor to charge air distributor

Nm

10

Powiązane dokumenty