ar0520p7306mrt

Remove/install exhaust camshaft adjustment solenoid

Typ ar · temat 05.20 · wersja 0100 · 2018-06-01

Dotyczy: Engine 256.9 in model 222

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 05 Sterowanie pracą silnika › 05.20 Wałek rozrządu, układ zmiany faz rozrządu — Seria 222

EinPAS 15 Silnik › 15.17 Rozrząd silnika › 15.17.30 Rozrząd zaworowy — Seria 222

Dotyczy też silników/skrzyń biegów: 256 9**

AR05.20-P-7306MRT

Remove/install exhaust camshaft adjustment solenoid

09.05.2018

Engine

256.9 in model 222

Remove/install exhaust camshaft adjustment solenoid

2

Electrical connector

4

Bolts

Y49/2

Exhaust camshaft solenoid

P05.20-2538-06

Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Topical note

Notes on threaded connections with aluminum screws/bolts

AH00.00-P-0006-01RM

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Topical note

Notes on threaded connections fastened using a tightening angle-based tightening process

AH00.00-P-0020-01A

Remove/install

1

Remove engine air intake duct downstream of air filter.

AR09.10-P-8130MRT

Installation: Only install upper engine cover after the leak test.

2

Remove the 48 V wiring harness from the engine suspension lug and place to one side.

3

Release and disconnect electrical connector (2).

4

Unscrew the bolts (4) and remove the solenoid for the outtake camshaft (Y49/2).

Installation: Replace screws/bolts (4).

Bolt, camshaft solenoid to timing case cover

*BA15.10-P-1003-03I

5

Install in the reverse order.

Check

6

Read out and delete fault memory.

AD00.00-P-2000-04B

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

7

Carry out engine test run and check engine for proper leaktightness and leaktightness.

8

Install upper engine cover.

AR01.10-P-2405MRT

Position sensor

Number

Designation

Engine 256.9

BA15.10-P-1003-03I

Bolt, camshaft solenoid to timing case cover

Stage 1

Nm

4

Stage 2

°

60

Powiązane dokumenty