P05.10-2316-01
Shown without tensioning rail
1 Timing chain for valve assembly
2 Slide rail
3 Chain tensioner
4 Bolts
5 Chain sprocket on oil pump
6 Screw
7 Timing chain for oil pump
8 Crankshaft
| Remove | ||
1 | Remove cylinder head cover | ||
2 | Position piston of cylinder 1 to ignition TDC | Turn engine at the crankshaft in the direction of rotation of the engine until the marking on the belt pulley/vibration damper aligns with the marking on the timing case cover and the bore on the camshaft sprocket aligns with the upper edge of the cylinder head separation surface | |
3 | Remove the tensioning rail | ||
4 | Remove timing case cover | ||
5 | Release timing chain for valve assembly (1) with chain tensioner (3) | ||
6 | Remove timing chain for valve assembly (1) | ||
| Install | ||
7 | Install timing chain for valve assembly (1) | ||
8 | Tension timing chain for valve assembly (1) with chain tensioner (3) | ||
9 | Install timing case cover | ||
10 | Install the tensioning rail | ||
11 | Inspect timing | The marking on the belt pulley/vibration damper should be in line with the marking on the timing case cover. The bore hole on the camshaft sprocket should be in line with the upper edge of the cylinder head separating surface. | |
12 | Install cylinder head cover |