P05.10-2319-06
1 Crankshaft sprocket
2 Chain tensioner of oil pump chain
3 Belt pulley
4 Balance shaft
5 Oil pump chain
| Removing/installing | ||
1 | Remove sliding rail from timing case cover | When removing the slide rail, the TDC marking on the belt pulley (3) is adjusted with respect to the positioning edge of the timing case cover (arrow A). The crankshaft must not be twisted any more. | |
2 | Press the chain tensioner of the oil pump chain (2) all the way to the stop and secure with a drift having 3.5 mm diameter through the bore (arrow B) | ||
3 | Remove oil pump | ||
4 | Remove the oil pump chain (5) | Do not twist the crankshaft. | |
Installation: When laying on the oil pump chain (5), pay attention to the basic position of the balance shaft (4). Refer to: | |||
Set the basic position of the balance shaft | |||
5 | Remove crankshaft gear (1) | Installation: Align the Woodruff key with the crankshaft; slide on crankshaft gear (1). | |
6 | Install in reverse order |