1 | Tensioning rail |
2 | Bearing pin |
3 | Slide rail |
4 | Retaining clip |
5 | Spring |
N05.10-2008-06
| Remove/install | ||
1 | Remove cylinder head | ||
2 | Remove timing case cover | ||
3 | Detach tensioning rail (1) from bearing pin (2) from the front | Installation: Clean and oil the bearing pin (2). | |
The plastic support for the tensioning rail (1) cannot be replaced separately. | |||
Cold degreasing agent/cold cleaning solvent HAKU 1025-920 | |||
4 | Remove slide rail (3) with retaining clip (4) | Installation: Ensure correct installation position of spring (5). | |
Detach slide rail (3) together with retaining clip (4) from bearing pin (2) from front and carefully slacken the spring (5). The plastic supports for the slide rail (3) and retaining clip (4) cannot be replaced individually. | |||
5 | Separate slide rail (3) from retaining clip (4) | Remove spring (5) from slide rail (3). | |
6 | Unhinge spring (5) from retaining clip (4) and remove | When replacing retaining clip (4). | |
7 | Install in the reverse order |