Detach/attach front cover with radial shaft sealing ring

AR01.40-S-8922-03EA

Detach/attach front cover with radial shaft sealing ring

 Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Topical note

Notes on threaded connections fastened using a tightening angle-based tightening process

AH00.00-P-0020-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Engine

654.9 in model 447

 Crankcase, timing case cover, end cover

Number

Designation

Engine 654.9 in model 447

BA01.40-N-1001-01EA

Front end cover to crankcase

Stage 1

Nm

8

Stage 2

°

30

Repair materials

Number

Designation

Order number

BR00.45-Z-1002-06A

Antifriction paste, rubber parts 2.5 kg, DBL 6867.00

A 000 989 01 60

Remove

1

Remove screws (1 to 15).

2

Remove the cover with the radial shaft sealing ring and seal.

3

Clean sealing surface on crankcase with lint-free rags.

Installing

4

Attach the  insertion device on the crankshaft.

5

Wet the radial shaft sealing ring and seal in the new cover with Wet with lubrication paste.

 The radial shaft sealing ring and seal are fixed in the cover.

6

Attach the new cover with radial shaft sealing ring and seal.

7

Slightly tighten screws (1 to 15) by hand.

8

Remove the  insertion device from the crankshaft.

9

In two stages, tighten the screws (1 to 15) in numerical sequence.  .