ar0140p8920mcc

Remove/install end cover together with shaft seal

Typ ar · temat 01.40 · wersja 0101 · 2007-09-10

Dotyczy: ENGINE 132.9 in MODEL 451.3 /4

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 01 Silnik kompletny, odpowietrzenie silnika, głowica cylindrów, skrzynia korbowa › 01.40 Skrzynia korbowa, pokrywa rozrządu, pokrywa zamykająca — Seria 451 (modele 3**, 4**)

EinPAS 15 Silnik › 15.15 Silnik spalinowy kompletny/obudowa silnika/mechanizm korbowy › 15.15.31 Skrzynia korbowa/separator oleju/odpowietrznik — Seria 451 (modele 3**, 4**)

Dotyczy też silników/skrzyń biegów: 132 9**

AR01.40-P-8920MCC

Remove/install end cover together with shaft seal

21.8.07

ENGINE 132.9 in MODEL 451.3 /4

Remove/install end cover together with shaft seal

P01.40-2215-04

1 End cover with radial shaft seal

2 Bolts

 	Remove/install
1	Remove oil pan	 In order to support the engine during the work procedure install the carrier again for front engine mount together with the torque support and remove transmission jack with removal fixture.	AR01.45-P-7500MCC
2	Remove flywheel		AR03.30-P-8002MCC
3	Remove bolts (2)		*BA01.40-P-1006-01M
4	Detach and remove end cover together with radial shaft seal (1) at crankcase	 Make sure that surfaces are completely clean to prevent leaks around the end cover with radial shaft sealing ring (1).
		 Installation: Clean sealing surface on crankcase (e.g. with acetone), clean contact surface to crankshaft with a clean rag without using cleaning agent. Coat crankcase with sealing mass.
		Sealant	*BR00.45-Z-1053-01A
	Notes on application of sealant to end cover with radial shaft seal		AH01.40-P-1000-06MCC
5	Install in the reverse order

 Crankcase, timing case cover, end cover

Number	Designation				Engine 132.9


BA01.40-P-1006-01M	Bolt connecting end cover of radial shaft sealing ring to the crankcase			Nm	10

Repair materials

Number	Designation	Order number
BR00.45-Z-1053-01A	Sealant	Q0000282V000000000

Powiązane dokumenty