ar0120p9750ff

Remove/install oil separator

Typ ar · temat 01.20 · wersja 0100 · 2004-07-01

Dotyczy: ENGINE 639.939 in MODEL 454.0

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 01 Silnik kompletny, odpowietrzenie silnika, głowica cylindrów, skrzynia korbowa › 01.20 Odpowietrzanie silnika, pokrywa głowicy cylindrów — Seria 454 (modele 0**) · Seria 639 (modele 939)

EinPAS 15 Silnik › 15.15 Silnik spalinowy kompletny/obudowa silnika/mechanizm korbowy › 15.15.31 Skrzynia korbowa/separator oleju/odpowietrznik — Seria 454 (modele 0**) · Seria 639 (modele 939)

AR01.20-P-9750FF

Remove/install oil separator

10.5.04

ENGINE 639.939 in MODEL 454.0

Remove/install oil separator

P01.20-2117-04

1 Trim panel

2 Hose

3 Oil separator

4 Bolts

5 Cylinder head cover

Remove/Install

1

Remove trim panel of cylinder head cover

AR01.20-P-5015FF

2

Remove pressure reservoir

AR07.09-P-0001FF

3

Loosen clamps (arrowed) and take off trim panel (1)

4

Detach hose (2) from oil separator (3)

5

Remove bolts (4)

*BA01.20-P-1003-01O

6

Loosen oil separator (3) from cylinder head cover (5) and remove

Installation: Clean the sealing surfaces and install new gasket.

7

Install in the reverse order

Danger!

Risk of accident caused by vehicle starting off when engine is running. Risk of injury caused by contusions and burns when working in engine during starting procedure

Secure vehicle to prevent it from moving.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

8

Conduct an engine test run and check the oil separator (3) for leaks

Crankcase ventilation, cylinder head cover

Number

Designation

Engine
639.939

BA01.20-P-1003-01O

Torx bolt of oil separator to cylinder head

Nm

12

Powiązane dokumenty