ar0120d9750tsv

Remove/install oil separator

Typ ar · temat 01.20 · wersja 0200 · 2020-03-12

Dotyczy: Engine 642 in model 907

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 01 Silnik kompletny, odpowietrzenie silnika, głowica cylindrów, skrzynia korbowa › 01.20 Odpowietrzanie silnika, pokrywa głowicy cylindrów — Seria 907

EinPAS 15 Silnik › 15.15 Silnik spalinowy kompletny/obudowa silnika/mechanizm korbowy › 15.15.31 Skrzynia korbowa/separator oleju/odpowietrznik — Seria 907

Dotyczy też silników/skrzyń biegów: 642 ***

AR01.20-D-9750TSV

Remove/install oil separator

06.03.2020

Engine

642 in model 907

Remove/install oil separator

D01.20-1054-09

1

Screw

4

Vent hose

6

Radial shaft sealing ring

2

Bolts

5

Sealing ring

7

Clip

3

Oil separator

Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Remove/install

1

Remove trim panel on right cylinder head cover

AR01.20-D-5017TSV

2

Remove screw/bolt (1)

Screw/bolt, bracket to cylinder head cover

*BA01.20-N-1004-01O

3

Remove screw/bolts (2)

Screw/bolt, oil separator to cylinder head

*BA01.20-N-1007-01O

4

Remove oil separator (3) and vent hose (4) from the cylinder head

Installation: Replace sealing ring (5).

Clean

5

Clean sealing surfaces on the oil separator (3) and cylinder head

Assembly cleaner

*BR00.45-Z-1028-04A

Check

6

Check radial shaft sealing ring (6)

Depending on findings

Install a new radial shaft sealing ring (6).

7

Unfasten clamp (7) and remove vent hose (4) from the oil separator (3)

When installing a new oil separator (3).

Installation: Check clamp (7).

Depending on findings

Replace clamp (7).

8

Install in the reverse order

Check

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

9

Check for leak tightness with engine running

Visual inspection only.

Crankcase ventilation system, cylinder head cover

Number

Designation

Engine 642 in model 907

BA01.20-N-1004-01O

Screw/bolt, bracket to cylinder head cover

M6x12

Nm

9

Crankcase ventilation system, cylinder head cover

Number

Designation

Engine 642 in model 907

BA01.20-N-1007-01O

Screw/bolt, oil separator to cylinder head

Nm

9

Repair materials

Number

Designation

Order number

BR00.45-Z-1028-04A

Assembly cleaner

A 000 986 56 01

Powiązane dokumenty