Disconnect, connect engine wiring harness

AR01.00-P-2410GS

Disconnect, connect engine wiring harness

14.2.12

 

Remove, Install



Notes on TELE AID emergency call system

Only if code ET2 fitted

AH82.95-P-0001-01GA

1.1

Activate service mode in the TELE AID emergency call system

 Only for code ET2: TELE AID - car telephone emergency call system.

AR82.95-P-0005-03GR

 Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A



Battery notes

All types.

AH54.10-P-0001-01A

2

Disconnect ground cable of battery

AR54.10-P-0003G

3

Detach cover (1) above external start terminalpoint (X4/30).

4

Unbolt circuit 30 terminal block (2) at external start terminal point (X4/30)

5

Remove air plenum chamber and water collector (3)

AR83.10-P-9998GM

6

Take off cover (4) at firewall

7

Unlock and detach electrical plug sockets (5, 6) at CDI control module (N3/9)

 First of all unplug socket (6) to enable socket (5) to be released.

8

Remove cover below instrument panel

AR68.10-P-1520GM

9

Unplug socket (7, 8) at front fuse and relay module (N10/1)

10

Pull engine wiring harness (9) out of body opening

11

Take off securing clamp (10)

12

Separate retaining straps (11) at splash wall and at coolant line

 Installation: Install new retaining straps.

13

Unplug sockets (12) at glow output stage (N14/2)

14

Separate central connector of automatic transmission (X22/2) at automatic transmission

15

Disconnect transmission ground cable (W49)

 Disconnect at frame.

16

Install in the reverse order

17.1

Deactivate the service mode in the TELE AID emergency call system

 Only for code ET2: TELE AID - car telephone emergency call system.

AR82.95-P-0005-03GR

18

Read diagnostic trouble code memory and erase

 STAR DIAGNOSIS
Stored faults which can be due to disconnected cables or a simulation during assembly or test work, must be worked on in the fault memories at the end of the work and erased.



Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

*WH58.30-Z-1048-13A

Number

Designation

WH58.30-Z-1048-13A

STAR DIAGNOSIS diagnosis system, Compact Passenger Car

6511 1801 00