ar0100d0200r

Inspect cylinders with a light probe

Typ ar · temat 01.00 · wersja 0101 · 2015-05-06

Dotyczy: Engine 646 in model 909

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 01 Silnik kompletny, odpowietrzenie silnika, głowica cylindrów, skrzynia korbowa › 01.00 Informacje ogólne — Seria 646 · Seria 909

EinPAS 15 Silnik › 15.15 Silnik spalinowy kompletny/obudowa silnika/mechanizm korbowy › 15.15.15 Silnik spalinowy kompletny — Seria 646 · Seria 909

AR01.00-D-0200R

Inspect cylinders with a light probe

30.4.15

Engine

646 in model 909

Inspect cylinders with a light probe

1

Light projector

2

Endoscope

D01.00-1132-06

Remove/install

1

Withdraw ignition key

Pull out ignition key to prevent unintentional starting.

2

Remove injectors

AR07.16-D-1000R

Check

3

Set piston on cylinder to be checked to bottom dead center (UT) by turning the crankshaft

Socket wrench bit

*001589650900

4

Connect endoscope (2) to injector well (1) and guide endoscope (2) through injector shaft into cylinder to be checked

000 588 01 21 00 Endoscope

WS01.00-P-0097B

5

Check cylindrical barrel for damage and wear

General information on inspecting cylinder walls

AH01.00-P-0300-01A

If there is wear on the cylinder, the cylinder barrel has become rough and the honing marks are no longer visible.

Remove cylinder head if cylinder wear or damage is not clearly detectable, see:

Remove/install cylinder head

AR01.30-D-5800RU

6

Check remaining cylinder barrels in the same way

7

Install in the reverse order

Inspect cylinders with a light probe

001 589 65 09 00

Socket wrench bit

Powiązane dokumenty