AP09.10-B-0980F | Replace air filter element | 12.02.16 |
Cumbustion engine 377 with Vehicle 695.039, 695.056
Cumbustion engine 457 with Vehicle 696.080, 696.090, 696.365, 696.369, 696.367, 695.053
Cumbustion engine 475 with Vehicle 696.369, 695.034, 695.051
Cumbustion engine 476 with Vehicle 695.052
B09.10-0084-01
B09.10-0085-01
Chassis 384.0/1, 386, 660.0, 682
1 Wing-nut
2 Air filter end cover
3 Self locking nut
4 Filter element
B09.10-0082-01
B09.10-0081-01
Chassis 695.034/051, 696.080/090/365/367/369
1 Wing-nut
2 Air filter end cover
3 Self locking nut
4 Filter element
| Remove | ||
1 | Remove wing-nut (1) together with air filter end cover (2) | ||
2 | Remove self-locking nut (3) together with air filter element (4) | Clean air filter bowl interior and other assembly components. | |
When using security filter element (optional), it should be replaced every three main element replacements or after, maximum, two years of use. | |||
| Install | ||
| Before assembling a new element, check for damages caused by transport or improper storage. Check sealing rubber for conditions and perfect bonding | ||
3 | Install a new element observing that it seats correctly on the sealing surface | For chassis 384, 386, 682 assemble air recycler (cycler) together with filter element. | |
4 | Attach air filter element (4) with self-locking nut (3) | It is very important that self-locking nut (3) is in perfect condition to avoid being loose and consequently non filtered air bypass. | |
For more security, mark the replacement date on top of the element and make a note on the maintenance manual. | |||
5 | Install air filter end cover (2) tightening wing-nut firmly (1) |