AN88.50-P-0004MCC | Retrofit BRABUS front spoiler | 6.12.11 |
MODEL 451.3 /4 (except 451.391 /491) up to 19.3.12
P88.50-2870-04
11 Lip
12 Front module
P88.50-2839-09
1 BRABUS front spoiler
2 Cover
3 Clips
4 Front CBS
8 Cover
9 Expansion clip
10 Clips
5 Lower front grille
6 Underbody paneling
7 Expansion clip
Modification notes
| Remove | ||
1 | Remove front spoiler | ||
| Install | ||
2 | Position sealing lip (11) on front module (12) and press on firmly | ||
3 | Clip covers (2) into BRABUS front spoiler (1) | Ensure that clips (3) are seated correctly. | |
4 | Position BRABUS front spoiler (1) on CBS front end (4) and arrest brackets (arrows B) | ||
5 | Arrest brackets (arrows C) between BRABUS front spoiler (1) and lower front grille (5) with extraction hook | The extraction hook is included in the assembly tool set. | |
Assembly tool set | |||
6 | Turn steering wheel to right, slightly push right fender liner to side and install expansion clip (7) | ||
7 | Turn steering wheel to left, slightly push left fender line to side and install expansion clip (9) | ||
8 | Clip brackets (arrows A) between BRABUS front spoiler (1) and underfloor paneling (6). | ||
9 | Position covers (8) on CBS front (4) and clip in clips (10) | ||
10 | Enter retrofitted equipment in Vehicle Documentation (VeDoc) | Attach note "BRABUS rear apron retrofitted according to AN88.50-P-0004MCC " to field organization texts for design group 88. |
Assembly tool set
450 589 07 99 00
Parts ordering notes
Part no. | Designation | Quantity |
DG 98 (see EPC) | BRABUS front spoiler | 1 |