ar8830p0505mcc

Remove/install front spoiler

Typ ar · temat 88.30 · wersja 0101 · 2011-11-03

Dotyczy: MODEL 451.3 /4 up to 19.3.12

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 88 Części dobudowane, klapy zewnętrzne › 88.30 Części dobudowane, zabezpieczanie przed wjechaniem pod pojazd — Seria 451 (modele 3**, 4**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.38 Zderzak/spojler/okładzina zewnętrzna/schowek/przednie zabezpieczenie › 35.38.30 Zderzak przedni — Seria 451 (modele 3**, 4**)

AR88.30-P-0505MCC

Remove/install front spoiler

21.10.11

MODEL 451.3 /4 up to 19.3.12

Remove/install front spoiler

P88.30-2409-06

Shown on front CBS with code (V07) Front fog lamp (FFO)

1 Fenders

2 Lower front grille

3 Front spoiler

4 Expansion clip

5 Cover

6 Expansion clip

7 Catch hook

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

1

Raise vehicle

2

Unclip catch hook (7) from covers (5) and remove covers (5)

3

Unclip front spoiler (3) from underfloor paneling

4

Turn wheel to right and remove expansion clip (4)

5

Turn wheel to left and remove expansion clip (6)

6

Unclip catch hook (arrows B) between lower front grille (2) and front spoiler (3)

Installation: Pull front grille (2) toward front spoiler (3) from rear with extraction hook and clip in.

Assembly tool set

*450589079900

7

Unclip front spoiler (3) from catch hook (arrows A) from front fenders (1) and remove.

Do not damage catch hooks (A) when unclipping. Otherwise the front spoiler (3) must be replaced.

8

Install in the reverse order

Remove/install front spoiler

Assembly tool set

450 589 07 99 00

Powiązane dokumenty