an5418w100101pr

Remove battery cable bracket

Typ an · temat 54.18 · wersja 0100 · 2012-02-10

Dotyczy: MODEL 970.0 /2 with TRANSMISSION 712.62 /63, 715.050 /060 with BODY 972.890 except CODE (B95) No antilock brake system except CODE (MK3) Variable vehicle speed limit 30 km/h and backup shift lock for refuse vehicles nicht in Verbindung mit getriebeabhängigem Nebenabtrieb MODEL 974.2 with TRANSMISSION 712.63, 715.060 with BODY 972.890 except CODE (B95) No antilock brake system except CODE (MK3) Variable vehicle speed limit 30 km/h and backup shift lock for refuse vehicles nicht in Verbindung mit getrie

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 54 Instalacja elektryczna, wyposażenie i wskaźniki › 54.18 Wiązki przewodów — Seria 970 (modele 0**, 2**) · Seria 972 (modele 890) · Seria 974 (modele 2**)

EinPAS 25 Instalacja elektryczna/sieć wymiany danych/wielofunkcyjne › 25.20 Sieć pojazdu › 25.20.3 Pofabryczny montaż/przebudowa — Seria 970 (modele 0**, 2**) · Seria 972 (modele 890) · Seria 974 (modele 2**)

Dotyczy też silników/skrzyń biegów: 712 62*, 712 63*, 715 050, 715 060

AN54.18-W-1001-01PR

Remove battery cable bracket

Danger!

Risk of death caused by working on permanent magnet retarder for groups of persons with implants. Risk of injury caused by burns that may occur due to contact with the hot rotor.

For persons with implants, a minimum distance of 30 cm between the permanent magnet retarder and the body parts of the affected person is to be maintained as a safe distance from the permanent magnet retarder.

Do not touch hot or rotating parts.

AS43.40-Z-0001-01A

Remove battery cable bracket

W43.40-1030-06

1 Detach connector (1) from transmission output speed rpm sensor (B57).

Only with code (GE1) Automatic gear control (AGS).

2 Detach connector (2) from speed sensor (B17).

Remove battery cable bracket

W43.40-1031-11

3 Detach bracket (3, 4) from battery cable (5, 6).

4 Detach bracket (7) from transmission.

The bracket (7) and the bolts (8) are no longer required, because the parts kit contains a new bracket and a new bolt.

Powiązane dokumenty