Service Information: Note on the installation of the Grundig on board unit for toll calculation

Type si · emne 82.88 · versjon 0100 · 2005-02-18

Gjelder for: MODEL 930, 932, 933, 934 with CODE (EX8) Preinstallation for distance-related toll calculation except CODE (DD1) Cab with 1400 mm floor-to-ceiling height (car transporter) MODEL 940, 942, 943, 944, 950.5 /6, 952.5 /6, 953.6, 954.5 with CODE (EX8) Preinstallation for distance-related toll calculation MODEL 970, 972, 974, 975, 976 with CODE (EX8) Preinstallation for distance-related toll calculation

Ikke tilgjengelig på «no»; vises på Engelsk.

SI82.88-W-0002A

15.2.05

MODEL 930, 932, 933, 934
with CODE (EX8) Preinstallation for distance-related toll calculation
except CODE (DD1) Cab with 1400 mm floor-to-ceiling height (car transporter)

MODEL 940, 942, 943, 944, 950.5 /6, 952.5 /6, 953.6, 954.5 with CODE (EX8) Preinstallation for distance-related toll calculation

MODEL 970, 972, 974, 975, 976 with CODE (EX8) Preinstallation for distance-related toll calculation

When installing the Grundig on-board unit on vehicles that come factory-equipped with the preinstallation for distance-related toll calculation (code EX8), it is essential that an attenuator be installed between the GPS antenna output and the GPS antenna jack on the Grundig OBU.

The attenuator can be ordered from the Toll Collect service partners via the Toll Collect Webshop under the designation Attenuator, 12.5 dB.

 Without this attenuator, GPS signals may be poorly received or distorted by the Grundig unit. Proper operation can then no longer be guaranteed.