si8288w0002a

Service Information: Note on the installation of the Grundig on board unit for toll calculation

Type si · topic 82.88 · version 0100 · 2005-02-18

Applies to: MODEL 930, 932, 933, 934 with CODE (EX8) Preinstallation for distance-related toll calculation except CODE (DD1) Cab with 1400 mm floor-to-ceiling height (car transporter) MODEL 940, 942, 943, 944, 950.5 /6, 952.5 /6, 953.6, 954.5 with CODE (EX8) Preinstallation for distance-related toll calculation MODEL 970, 972, 974, 975, 976 with CODE (EX8) Preinstallation for distance-related toll calculation

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.88 Toll system — Series 930 · Series 932 · Series 933 · Series 934 · Series 940 · Series 942 · Series 943 · Series 944 · Series 950 (models 5**, 6**) · Series 952 (models 5**, 6**) · Series 953 (models 6**) · Series 954 (models 5**) · Series 970 · Series 972 · Series 974 · Series 975 · Series 976

EinPAS 31 Communication/information/entertainment › 31.35 Tachograph/toll system › 31.35.1 Basic information — Series 930 · Series 932 · Series 933 · Series 934 · Series 940 · Series 942 · Series 943 · Series 944 · Series 950 (models 5**, 6**) · Series 952 (models 5**, 6**) · Series 953 (models 6**) · Series 954 (models 5**) · Series 970 · Series 972 · Series 974 · Series 975 · Series 976

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.20 Service information — Series 930 · Series 932 · Series 933 · Series 934 · Series 940 · Series 942 · Series 943 · Series 944 · Series 950 (models 5**, 6**) · Series 952 (models 5**, 6**) · Series 953 (models 6**) · Series 954 (models 5**) · Series 970 · Series 972 · Series 974 · Series 975 · Series 976

SI82.88-W-0002A

Service Information: Note on the installation of the Grundig on board unit for toll calculation

15.2.05

MODEL 930, 932, 933, 934
with CODE (EX8) Preinstallation for distance-related toll calculation
except CODE (DD1) Cab with 1400 mm floor-to-ceiling height (car transporter)

MODEL 940, 942, 943, 944, 950.5 /6, 952.5 /6, 953.6, 954.5 with CODE (EX8) Preinstallation for distance-related toll calculation

MODEL 970, 972, 974, 975, 976 with CODE (EX8) Preinstallation for distance-related toll calculation

When installing the Grundig on-board unit on vehicles that come factory-equipped with the preinstallation for distance-related toll calculation (code EX8), it is essential that an attenuator be installed between the GPS antenna output and the GPS antenna jack on the Grundig OBU.

The attenuator can be ordered from the Toll Collect service partners via the Toll Collect Webshop under the designation Attenuator, 12.5 dB.

Without this attenuator, GPS signals may be poorly received or distorted by the Grundig unit. Proper operation can then no longer be guaranteed.