Empty, fill AdBlue tank

AR14.40-S-2014-02E	Empty, fill AdBlue tank
 Warning	Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue	Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.	AS14.40-Z-0001-01A
Topical note	Notes on avoiding damage through contamination and foreign objects		AH00.00-P-5000-01A
	Notes on use, material properties and handling of AdBlue®		AH14.40-N-0001-01A
	000 588 01 71 00 Extraction pump		WS14.00-P-0013B

Model	447 with engine 622
Model	447 with engine 651
	except code MF4 (Emissions category Euro 4 N1 GR.III/N2)

Modification notes

09.08.2018

Basic data reference added.

Step 5

 Exhaust gas aftertreatment filling capacity

Number	Designation		Engine 622, 651 in model 447 except code KP4	Engine 622, 651 in model 447 with code KP4
BF49.20-N-1001-01E	Filling capacity for AdBlue® container	Liter	11,5	25
	Sheet		BB00.40-P-0352-01A	BB00.40-P-0352-01A

Draining

1	Cover working area around the AdBlue® filler neck with film and absorbent paper.

2	Remove cap from AdBlue® filler neck.

 Dirt must not be allowed to find its way into the EATS.
Damage or malfunctions can occur otherwise.

3	Extend intake side of the extraction pump with a hose from the modification set.

4	Suction off AdBlue® via AdBlue® filler neck.

Filling

5	Fill with new AdBlue®  up to the inner lower edge of the thread on the AdBlue® filler neck in the AdBlue® filler neck.

6	Remove sheet and paper.

 Do not allow any paper to get into the AdBlue® filler neck or AdBlue® container.
There is a risk of damage to the AdBlue® system otherwise.

7	Install cap on AdBlue® filler neck.