ar0704d0100sd
Remove/install intake manifold pressure sensor
Type ar · emne 07.04 · versjon 0107 · 2014-11-28
Gjelder for: ENGINE 642, 646, 651 in MODEL 906 ENGINE 651 in MODEL 900
Ikke tilgjengelig på «no»; vises på Engelsk.
Plassering
Funksjonsgruppe 1 Motor › 07 Blandingstilberedning › 07.04 Givere, følere, sensorer — Serie 646 · Serie 651 · Serie 900 · Serie 906
EinPAS 15 Motor › 15.30 Luftinnsug/lufttilførsel › 15.30.12 Sensor/bryter/ledningsnett — Serie 646 · Serie 651 · Serie 900 · Serie 906
Gjelder også motorer/girkasser: 642 ***
AR07.04-D-0100SD
| Remove/install intake manifold pressure sensor
| 20.11.2014
|
ENGINE
| 642, 646, 651 in MODEL 906
|
ENGINE
| 651 in MODEL 900
|
1
| Electrical connection
|
| B28
| Intake manifold pressure sensor (for engine 642.992/993, 646)
|
| B28/19
| Intake manifold pressure sensor (for engine 642.896/898)
|
2
| Air filter housing
|
| B28/17
| Intake manifold pressure sensor (for engine 651)
|
|
|
|
| Remove/install
|
|
|
1
| Disconnect electrical connection (1) at intake manifold pressure sensor (B28, B28/17 or B28/19)
|
|
|
2
| Remove screw/bolts on intake manifold pressure sensor (B28, B28/17 or B28/19)
|
|
|
3
| Pull the intake manifold pressure sensor (B28, B28/17 or B28/19) out of the air filter housing (2)
| Installation: Check O-ring and replace if necessary.
|
|
4
| Install in the reverse order
|
|
|
