ar8230d6285a

Remove/install rain sensor control module

Type ar · thema 82.30 · versie 0102 · 2003-09-15

Geldig voor: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM1) Clear heatable windshield with rain sensor MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM2) Tinted heatable windshield with rain sensor MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (FM2) Tinted heatable windshield with rain sensor

Niet beschikbaar in “nl”; getoond in Engels.

Plaats

Functiegroep 3 Opbouw/carrosserie › 82 Elektrische installatie, opbouw/carrosserie › 82.30 Ruitewissers — Serie 901 (modellen 6**) · Serie 902 (modellen 6**) · Serie 903 (modellen 6**) · Serie 904 (modellen 6**) · Serie 905 (modellen 6**)

EinPAS 36 Zicht › 36.30 Wissen/sproeien › 36.30.11 Regeleenheid/relais — Serie 901 (modellen 6**) · Serie 902 (modellen 6**) · Serie 903 (modellen 6**) · Serie 904 (modellen 6**) · Serie 905 (modellen 6**)

AR82.30-D-6285A

Remove/install rain sensor control module

27.9.02

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM1) Clear heatable windshield with rain sensor

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM2) Tinted heatable windshield with rain sensor

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (FM2) Tinted heatable windshield with rain sensor

Remove/install rain sensor control module

1 Tie strap

2 Plug-in wiring plug connection

3 Nut

4 Screw

5 Control module

D82.30-0019-03

Remove/install

1

Use a knife to cut through tie straps (1) on control module (5)

2

Unlock and disconnect electrical connector (2) on control module (5)

3

Unscrew both nuts (3) and remove control module

4

Install in the reverse order

5

Perform function check